News

Fabled Continues To Define New Gold System, Hits Lower Feeder, which Returns 580.01 g/t Silver Eq, PLUS 19.90% Lead, 5.18% Zinc and 1.29% Copper

August 17, 2021

Vancouver, British Columbia – Fabled Silver Gold Corp. (“Fabled” or the “Company”) (TSXV: FCO; OTCQB: FBSGF, and FSE: 7NQ) is pleased to announce updates of the results of diamond drilling from the newly upgraded 14,200-meter drill program on the “Santa Maria” Property in Parral, Mexico.

Peter J. Hawley, CEO and President, remarks, “We are pleased to announce drill assay results for surface diamond drill holes SM20-23 and SM20-24, please see Figure 1 below.

Mr. Hawley continues: “As assay results from this new gold domain system are received, we are refining the interpretation of structural controls as seen in Figure 1, which is an isopac contour of gold grade multiplied by thickness.

Figure 1 – Longitudinal View of Area of Current Drilling

The fence of holes SM20-22, 23 and 24 are located 75 meters to the west of drill collars SM20-19-20 and were designed to tighten up the interpretation or boundaries of the new Santa Maria gold structure. The drill holes targeted intercepting the structure at vertical depths of -175, -225, and -275 meters, respectively. As one can see, the interpreted mineral / structural thesis which includes gold mineralization is plunging 45 degrees to the west continues to be validated and remains open in all directions.

SM20 – 23

As previously reported, drill holes SM20-19 intercepted a large low-grade structure below a high-grade zone. Both holes SM20-19 and SM20-21 intercepted the low-grade structure at the same vertical depth of -225 meters which appears to contain little gold at this elevation.

In this case, hole SM 20-23 intercepted not only the structure but what is being interpreted as a lower feeder zone for mineralization and reported 18.64 oz silver Eq per tonne, 437.8 lb. of lead per tonne, 113.96 lb. of zinc per tonne and 28.38 lb. copper per tonne over a width of 0.80 meters.

Table 1- Drill hole SM20-23 Assay Results

Drill Hole

From m

To m

Width m

Au g/t

Ag g/t

AgEq* g/t

Pb %

Zn %

Cu %

SM20-23

74.80

75.00

0.20

0.68

75.20

110.18

0.09

0.10

0.02

 

100.70

101.55

0.85

0.98

9.80

60.21

0.04

0.07

0.01

 

168.45

169.25

0.80

0.09

63.30

67.93

0.35

0.63

0.07

 

231.15

231.40

0.25

0.51

44.50

70.73

0.95

1.19

0.06

 

237.30

257.40

20.10

0.18

35.55

44.81

1.08

0.66

0.09

Includes

251.50

257.40

5.90

0.30

97.44

112.87

3.28

1.46

0.25

Includes

255.00

255.80

0.80

0.70

544.00

580.01

19.90

5.18

1.29

  • ** Ag Equivalent (“Ag Eq”) grade is calculated using $20 per ounce Ag and $1,600 Au

Photo 1 – SM20-23 Massive Sulphide Lower Feeder Zone

Figure 2 – Cross Section for Drill Hole SM20-23                                                

SM20-24

As previously reported, drill holes SM20-19 intercepted a large low-grade structure below a high-grade zone. The same applies in this case. Hole SM20-24 intercepted the structure at the vertical depth of -275 meters below surface which contains little gold at this elevation and confirms the limits of the lack or little gold contained.

Table 2- Drill hole SM20-24 Assay Results

Drill Hole

From m

To m

Width m

Au g/t

Ag g/t

Ag Eq* g/t

Pb %

Zn %

Cu %

SM20-24

263.5

267.95

4.45

0.13

14.73

21.42

0.32

0.45

0.03

 

264.45

267.00

2.55

0.09

20.05

24.68

0.44

0.62

0.04

 

264.45

264.80

0.35

0.24

70.05

82.85

1.65

2.11

0.11

  • ** Ag Equivalent (“Ag Eq”) grade is calculated using $20 per ounce Ag and $1,600 Au

FUTURE DRILLING UPDATE

The fence of drill holes SM20-25, 26 and 27 are located another 75 meters to the west of drill collars SM20-22, 23 and 24 and were designed to again tighten up the interpretation or boundaries of the new Santa Maria gold structure, see Figure 1 above.

Drill holes SM20-25 – 29 have been completed and submitted for assay. Hole SM20-30 is in progress and sites for holes SM20-31 to 36 are planned, subject to assays results and structural interpretation.

QA QC Procedure

Analytical results of sampling reported by Fabled Silver Gold represent core samples that have been sawn in half with half of the core sampled and submitted by Fabled Silver Gold staff directly to ALS Chemex, Chihuahua, Chihuahua, Mexico. Samples were crushed, split, and pulverized as per ALS Chemex method PREP-31, then analyzed for ME-ICP61 33 element package by four acid digestion with ICP-AES Finish. ME-GRA21 method for Au and Ag by fire assay and gravimetric finish, 30g nominal sample weight.

Over Limit Methods

For samples triggering precious metal over-limit thresholds of 10 g/t Au or 100 g/t Ag, the following is being used:

Au-GRA21 Au by fire assay and gravimetric finish with 30 g sample.

Ag-GRA21 Ag by fire assay and gravimetric finish.

Fabled Silver Gold monitors QA/QC using commercially sourced standards and locally sourced blank materials inserted within the sample sequence at regular intervals.

About Fabled Silver Gold Corp.

Fabled is focused on acquiring, exploring and operating properties that yield near-term metal production. The Company has an experienced management team with multiple years of involvement in mining and exploration in Mexico. The Company's mandate is to focus on acquiring precious metal properties in Mexico with blue-sky exploration potential.

The Company has entered into an agreement with Golden Minerals Company (NYSE American and       TSX: AUMN) to acquire the Santa Maria Property, a high-grade silver-gold property situated in the center of the Mexican epithermal silver-gold belt. The belt has been recognized as a significant metallogenic province, which has reportedly produced more silver than any other equivalent area in the world.

 

Mr. Peter J. Hawley, President and C.E.O.

Fabled Silver Gold Corp.

Phone: (819) 316-0919

 

For further information please contact:

The technical information contained in this news release has been approved by Peter J. Hawley, P.Geo. President and C.E.O. of Fabled, who is a Qualified Person as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

Neither the TSX Venture Exchange nor its Regulations Service Provider (as that term is defined in the policies of the TSX Venture Exchange) does accept responsibility for the adequacy or accuracy of this news release.

Certain statements contained in this news release constitute "forward-looking information" as such term is used in applicable Canadian securities laws. Forward-looking information is based on plans, expectations and estimates of management at the date the information is provided and is subject to certain factors and assumptions, including, that the Company's financial condition and development plans do not change as a result of unforeseen events and that the Company obtains any required regulatory approvals.

Forward-looking information is subject to a variety of risks and uncertainties and other factors that could cause plans, estimates and actual results to vary materially from those projected in such forward-looking information. Some of the risks and other factors that could cause results to differ materially from those expressed in the forward-looking statements include, but are not limited to: impacts from the coronavirus or other epidemics, general economic conditions in Canada, the United States and globally; industry conditions, including fluctuations in commodity prices; governmental regulation of the mining industry, including environmental regulation; geological, technical and drilling problems; unanticipated operating events; competition for and/or inability to retain drilling rigs and other services; the availability of capital

on acceptable terms; the need to obtain required approvals from regulatory authorities; stock market volatility; volatility in market prices for commodities; liabilities inherent in mining operations; changes in tax laws and incentive programs relating to the mining industry; as well as the other risks and uncertainties applicable to the Company as set forth in the Company's continuous disclosure filings filed under the Company's profile at www.sedar.com. The Company undertakes no obligation to update these forward-looking statements, other than as required by applicable law.